Home :: Freebies :: Crafts :: General Crafts :: Beaded Wooden Cross

Beaded Wooden Cross

Beaded Wooden Cross

Beaded Wooden Cross

Designed by: Amy Law
Skill Level: Beginner


  • Wood cross by Walnut Hollow

  • Fine #8 Braid 201C

  • Tapestry #12 Braid 001J

  • Medium #16 Braid 007C, 032

  • 1/16" Ribbon 208C

  • pebble texture paper- Cobblestone by Fibermark, Double Espresso

  • floral paper- Anna Griffin Pink Green Floral AG847

  • Cabochon in matching color

  • 8x10 sheet Treasure Tape

  • Treasure It Diamond Beadlets

  • white, light pink acrylic paint

1. First, paint your cross. Allow it to dry thoroughly.

2. Trace your cross shape onto blank paper to make a template. Cut out the shapes for each arm by cutting along the inside of the traced outline, about1/4" in. (Round off the ends as seen in picture.) Trace your shapes onto the floral paper and cut them out.

3. Peel back the white liner on your tape and place your cutouts, printed side UP, on the tape. Replace the liner and smooth out any air pockets with your fingers. Cut out your shapes and repeat this process to adhere tape to the front of your inserts (this time place them printed side DOWN). Peelthe liner from the back of each insert and center on the appropriate arm of your cross.

4. Cut wiggly shapes from your textured brown paper. Arrange them on your floral shapes- peel back the red liner and place your brown pieces on them. Replace your liner.

5. Embellish one arm at a time. Peel back the liner and begin with an outline around the outside of your floral shape. Then outline the brown pieces. Finish with a loop design on the rest of the tape. Replace liner until all arms have been embellished.

6. Cut a small circle of tape, the same size as the center of the "flower" shape on your cross. Peel the white liner off your circle and place it on the fower center. Peel back the red liner and place your cabochon in the middle. Use braid to outline the edge of the circle.

7. To finish, peel off all liner. Place cross in a shallow tray or ziplock bag and pour Diamond Beadlets over the exposed tape areas. Swirl the beadlets with your fingers to cover fully, and tap to remove excess beadlets.

Printing Instructions:
To print the instructions for this project click on the on the link above Printable version and then print the page using your web browser.  

If you have trouble printing this page and would like us to send you a printed copy send a #10 SASE to: Beaded Wooden Cross, P.O. Box 1258, Parkersburg, WV 26102.

© Copyright 2006 Kreinik. May be reproduced but not sold. Beads, thread and tape available from www.kreinik.com, or call 1-800-537-2166 for more information.